Getting The Groove.
We work together as a team to determine
What you can expect,
and exactly what the cost may be.
Are you thinking this might be another scam?
Here's what a professor from a leading university
had to say about his testing of
The Gadgetman Groove
Dr. John Balachandra,
formerly Director of
The University of California's
Center for Sustainable Energies and Power Systems
To find out what you can expect, go to our
Video Reports Page
Or, if you've decided, you can
GET GROOVED NOW!
Whether you're talking about
a Chain Saw
You're going to know
something good has happened to your engine!
And all of our customers are protected by a
100% Satisfaction Guarantee!
(Reversal of the modification is required.)
There are three ways to get The Groove.
1) Through the Mail
2) Personal Service by a Local Gadgetman
3) Learn the Technology Yourself
Here's how they work:
With the mail-in service,
you send us your throttle body or
we order one for your vehicle.
(a core charge will apply.)
We modify the throttle body and send it to you.
You install it in a simple 20-minute process,
adding only a single vacuum cap.
2) Personal Service by a Gadgetman
In this case, you will need to visit
St. Catharines, Ontario
or by Gadgetman himself in
If you find we have someone listed near you,
but provide no contact information,
they're on the
Personal License Program
and are still learning.
3) Learn to do it YOURSELF!
If you have a some mechanical aptitude
and can operate a Dremel,
you have what it takes!
Whether you're a Garage-Level Tinkerer
or a Professional Service Technician,
you can learn to Do The Groove in a few days,
and master it in a few weeks.
All you need are the right TOOLS,
the right TRAINING
and the right RESOURCES.
We have that, for SURE!
Learn to Do The Groove!
Licensing is available for as little as
If you are suffering financially,
ask Tracy about a partial scholarship!
No matter which way you go, we want you to know
we're glad you've taken an interest
in our little
If you still can't decide, feel free to
E-mail Tracy Gallaway
and introduce yourself!
And if you don't want to wait,
call him at